Payment & Shipping Terms:
|Product Name:||1 Ton Per Hour Gas Steam Boiler Low Pressure Boiler For Food Factory||Capcity:||1ton Steam Output Per Hour|
|Avilable Fuel:||Natural Gas,lpg,cng||Working Pressure:||5bar-25bar|
|Boiler Type:||Horizontal Fire Tube Boiler||Inner Structure:||Wet Back Struture|
|Control System:||Automatic And Intelligient Control System||Consumption:||Low Cost|
high efficiency gas boiler,
gas fired steam boiler
1 Ton Per Hour Gas Steam Boiler Low Pressure Boiler For Food Factory
WNS series gas/oil fired steam boiler is horizontal three pass fire tube wet back full automatic steam boiler. It normally suitable for 500kg to 20ton/h capacity, use all kinds of gas and oil fuels,such as natural gas, lpg,lng,cng,city gas,biogas, diesel oil,heavy oil.
3. Design pressure:1.0Mpa(10bar), 1.25Mpa(13bar), 1.6Mpa(16bar),2.5Mpa(25bar)
4. Stem temperature:below 224 degree
5. Design fuel:natural gas, lpg,lng,cng,city gas,biogas, diesel oil,heavy oil
6. Structure: three pass fire tube wet back
1. You will save the fuel consumption cost (save oil 3-5kg/h) and have low loss of thermal heat effiency(exceed 92%).
(1). Three pass structure,which extend the flow of smoke and enhance the heat transfer.
(2). Adopt bog size whole corrugated furnace,big heating area,sastify the free expansion of boiler, improve the boiler effiency.
(3). Whole adopt corrugated tubes,strengthening heat transfer and eliminating welding stress. Other companies also use corrugated tubes, but we adopt the latest professor “Li Zhiguang”(a very famous boiler expert in China)technoly,the depth of the screw thread and spacing between two screw threads are rationally designed.
2. You will get enough steam output and high quality steam.
(1). Our boiler design big size water volume,the steam output is stable and steam quality is good.
(2). Design special steam water separator,reduce steam humidity and improve steam quality.
3. You can operate the boiler at safe and reliable case.
(1). Whole wet back structure and transition multi-loop full-temperature condenser design, ND just material, fin tube design,which highly reduces the back plate sheet temperature(around 50°).
(2). Double layer 12cm aluminum silicate insulation material,two stage anti-leak design and tight seal to avoid leakage phenomenon.
(3). Design tension bars,increasing the tube plate strength, preventing cracking.
(4). Explosion proof door design,prevent explosion, reduce the damage to the boiler, improve the safety of boiler.
4. You can use the boiler for longer life (More than 25 years ).
(1). 5-10% overload capacity design and reasonably configurate spare parts,reduce equipment fatigue.
(2). New type refractory material,solidification strong, long using life,which will not fall off after shaking.
(3). Smoke chamber ultrasonic testing, overpressure 40-50% water pressure test,ensure the boiler quality.
(4). Raw materials are provided by China famous steel and steel pipe factory provide, which controls the boiler quality from source.
(5). 61 years boiler manufacturing experience, mature design and production team.
|Boiler model||Capacity||Pressure||Feed temp.||Steam temp.||Fuel consump.||Thermal efficiency|
|Light oil||Heavy oil||Natural gas|
|WNS 2-1.25- Y(Q)||2||1.25||20||194||129.6||132.2||165||92|
For know more details, please contact by firstname.lastname@example.org
1. Safety: With water level, leakage steam, steam pressure control. Make sure boiler working safety.
2. Product quality ensured by: Strength calculation report, hydraulic test, X-ray, non-destructive test.
3. Efficient: Well insulation and excellent structure.
4. Spirally corrugated tube increase the strength and also meets the needs of heat expansion of each parts.
5. Welding: Welding mainly uses advanced automatic welding, gas protected welding, TIG welding. Drum and other main pressure parts adopt CNC automatic welding, all of the welding 100% passed penetrant inspection.
1. One year parts warranty,life-long service
2. Spare parts available at ex-factory price
3. Different voltage available
4. 100% tested before delivery
5. Engineer on-site instruction of installation and commissioning available.
6. After-sale services: Assist clients to prepare for the first construction, and also can arrange engineer on-site instruction of installation and commissioning. Install and debug the equipment; Train the first-line operators; Examine the equipment;
Contact Person: Luna